API 16A manual annular BOP Cameron oil gas production

API 16A annular BOP

Use: Well Drilling
Type: Bop
Processing Type: Forging
Certification: API

Our API 16A hydril annular BOP can be used in work over and drilling operations equipped with hydril control systems. The BOPs are designed and manufactured in full conformity to the API 16A standard. The annular BOP mainly consists of a body, a header, a rubber core, and a piston. The inner rubber core is interchangeable. While the annular BOP can be used independently, it normally works with a single or a double BOP.It can seal the drilling tool or well bore efficiently, preventing oil well blow outs. Its anti H2S performance conforms to the NACE MR 0175 standard.

Packaging Details:Packed in wooden cases, container transport
Port: Qingdao Shanghai Tianjin

1.Annular BOP can fully seal the wellhead when there is no string inside the wellbore.

2.Annular BOP can seal the annulus space of the wellhead when there is a string, wire line and cable inside the wellbore.

3.Snubbing can be performed if the butt welding drill pipe has an 18°beve.

4.Equipped with an energy accumulator, and a tubing coupling can pass through the annular BOP under pressure when well pressure is less than 3Mpa.

 Annular BOP for Workover

Model FH18-21 FH18-35
Nominal diameter(in) 7 1/16 7 3/8
Rated working pressure(psi) 3000 5000
Strength pressure test(psi) 6000 7500
Oil cylinder working pressure(psi) 1200-1500 1200~1500
Piston stroke(mm) 100 100
Metal temperature class(℃) -29~121 -29~121
Nonmetal temp. class(℃) -18~121 -18~121
Oil cylinder closed chamber volume(L) 17 17
Oil cylinder open chamber volume(L) 11.6 11.6
Bolt quantity and diameterc 12-M30 x 3 x 140 12-M36 x 3 x 180
Ring gasket R45 R46
Dimension(mm) 737 x 740 737 x 770
Weight(lb) 2628 2690

 

Annular BOP for Well Driling

Model FH35-35 FH35-70
Nominal diameter(in) 13 5/8 13 5/8
Rated working pressure(psi) 5000 10000
Strength pressure test(psi) 7500 7500
Oil cylinder working pressure(psi) 1200-1500 1200~1500
Piston stroke(mm) 100 100
Metal temperature class(℃) -29~121 -29~121
Nonmetal temp. class(℃) -18~121 -18~121
Oil cylinder closed chamber volume(L) 17 17
Oil cylinder open chamber volume(L) 11.6 11.6

Bolt quantity and diameterc

12-M30 x 3 x 140 12-M36 x 3 x 180
Ring gasket R45 R46
Dimension(mm) 737 x 740 1554x 1742
Weight(lb) 2628 12750

 

 BOP Testing Lab

We are the SINOPEC designated well control experimental base, it owns the first international advanced well control equipment test device in China, and can take all kinds of water pressure and air pressure sealing test, the maximum pressure can reach to 35000psi. All the test processes are controlled by computer. 

1.Host Unit

The host unit is an important part of well control equipment, speed of movement of the reciprocating cylinder 600 mm/s, master cylinder has the bearing capacity of 300 t, mainly to complete the bop forced tripping test, ram preventer suspension test and casing head hanging load test.

2. Hydraulic Pressure System

The maximum test pressure of water pressure system is 230MPa.The hydraulic system provides pressure source for all well controlled product tests, such as seal test, strength test, suspension test and forced lifting test.

3.Gas Tightness Test System

The test pressure of system is 230MPa.Test medium: self-made nitrogen.The water tank is 5 meters * 6 meters * 5 meters, and cameras are installed on the side wall and crane to monitor the whole process of test pressure in real time. The computer controls the lifting and unloading pressure.The pneumatic system can realize all gas seal tests of well – controlled products.

4.PR2 valve pressure and temperature cycling test 

This PR2testing device can perform dynamic test and air tightness test in high and low temperature, pressure and temperature cycling test. This device was proved achieving national level by DNV.

Local Team Support on API 16A manual annular BOP

Listen to what Our Clients Say About API 16A manual annular BOP

Ask a Quick Quote