About us

The main routine inspection and maintenance for the drilling fluid shale shaker

2014-04-08 14:37:04

The drilling fluid shale shaker is widely used in stone production, metallurgy, refractory materials, coal and other fields. The main routine inspection and maintenance for the drilling fluid shale shaker is as follows:

1, The fastening bolts carefully check each junction of the screening machine loose. Continue to run if loose will cause damage to the screen.

2, From the vibration motor to switch wiring for wear, vibration-resistant neoprene cable to be used when replacing the cable. Non-missing items running.

3, Check whether the abnormal sound and abnormal electrical heating phenomenon. Temperature high limit motor bearing portion of 40 ° C than the ambient temperature, if not normal to add oil or replacement. Motor mechanic with expertise in renovation should be.

4, The screen is tensioned mesh is damaged, promptly replaced if damaged.

5, Each screen machine clean after use must take internally.


Pre: Notes on using the drilling fluid centrifuger
Next: Replacement and conservation for the vibration screen mesh
Hot Products
LNG Station Equipment

There are two different types of LNG sta

CNG Pressure Reducing Station

There are two different types of CNG Pre

Pressure control system

Pressure control system in the gas trans

Gas Pressure Reducing System

petroleum and natural gas treatment devi

Need Help?

or E-mail us:
huangwei@hawein.com
Follow Us